NL – 200S


The Neotek NL-200S is a stand-alone, straight or curved self-contained light emitting diode fixture that is available from 8” to 96”. Features an LED light strip installed onto an aluminum extrusion, and includes wiring harness that plugs directly into a remote 24v power supply. Designed specifically for both interior & exterior use – surface mount or suspended installation.


Extrusion: Aluminum mill finish and consists of two parts: top & bottom. Extrusion: The extrusion will be 2 parts (top and bottom) and shall be made of aluminum. The bottom extrusion features four .125 diameter holes for end plate screws or steel pins to be pressed into for attachment of adjacent fixtures. The base extrusion can be used as a wire way.

LEDs: High output 3528 binned chips, 24v operating. Consuming 3.00 watts per foot and available in colors listed below. The chips and circuitry are fastened to the aluminum fixture. The strips produce 420 lumens per foot.

Angle of illumination: 120 degrees

Power Supply: The power supply is a dimmable or non-dimmable solid state. The power supply is remote from the fixture in an accessible area. The power supply has a 24v output and wattage to be rated for 3.00 watts per foot

End Caps: Aluminum end cap on exposed ends – with or without wire holes as needed

All LED linear fixtures are dimmable using various types of dimmers. RGB can be controlled with any DMX 512 protocol, however assistance is available from Neotek for more specific control solutions.

Standard Options

Colors of LED Light: 24K White, 28K White, 30K White, 35K White, 40K White, 65K White, Red, Green, Blue, Amber, RGB

Input Voltage: 120v or 277V

Dimming Type: 0-120VL(LV), 0-10V or none

Fixture finish: Standard mill, black or custom

Application: Interior IP00 or exterior IP67

Custom Options

Powder coated colors