The Neotek NL-200SL HO is a stand-alone, straight or curved self-contained light emitting diode fixture that is available from 8” to 96”. Features an LED light strip installed onto an aluminum extrusion, and includes wiring harness that plugs directly into a remote 24v power supply. Designed specifically for both interior & exterior use – surface mount of suspended installation.
Extrusion: Aluminum mill finish and consists of two parts: top & bottom. Extrusion: The extrusion will be 2 parts (top and bottom) and shall be made of aluminum. The bottom extrusion features four .125 diameter holes for end plate screws or steel pins to be pressed into for attachment of adjacent fixtures. The base extrusion can be used as a wire way.
LEDs: High output 3528 binned chips, 24v operating. Consuming 6.00 watts per foot and available in colors listed below. The chips and circuitry are fastened to the aluminum fixture. The strips produce 840 lumens per foot.
Angle of illumination: 120 degrees
Power Supply: The power supply is a dimmable or non-dimmable solid state. The power supply is remote from the fixture in an accessible area. The power supply has a 24v output and wattage to be rated for 6.00 watts per foot
End Caps: Aluminum end cap on exposed ends – with or without wire holes as needed
All LED linear fixtures are dimmable using various types of dimmers. RGB can be controlled with any DMX 512 protocol, however assistance is available from Neotek for more specific control solutions.
Colors of LED Light: 24K White, 28K White, 30K White, 35K White, 40K White, 65K White, Red, Green, Blue, Amber, RGB
Lens: Frosted or clear
Input Voltage: 120v or 277V
Dimming Type: 0-120VL(LV), 0-10V or none
Fixture finish: Standard mill, black or custom
Application: Interior IP00 or exterior IP67
Powder coated colors