The NL-140 is a straight light emitting diode fixture that’s designed to be mounted in grade for both concrete or pavers, and can receive foot or light vehicle traffic. It features an LED light strip installed onto an aluminum extrusion, and includes wiring harness that plugs directly into a remote 24v power supply. Designed specifically for both interior & exterior use – surface mount only.
Features
Extrusion: Aluminum standard mill finish
LEDs: High output 3528 binned chips, 24v operating. Consuming 3.00 watts per foot and available in colors below. The chips and circuitry are fastened to the aluminum fixture. The strips produce 380 lumens per foot.
Angle of illumination: 60 degrees
Power Supply: The power supply is a dimmable or non-dimmable solid state. The power supply is remote from the fixture is an accessible area. The power supply has a 24v output and wattage to be rated for 3.00 watts per foot.
End Caps: Polypropylene end cap on exposed ends – with or without wire holes as needed
Lens: Frosted polycarbonate
All LED linear fixtures are dimmable using various types of dimmers. RGB can be controlled with any DMX 512 protocol, however assistance is available from Neotek for more specific control solutions.
Standard Options
Colors of LED Light: 24K White, 28K White, 30K White, 35K White, 40K White, 65K White, Red, Green, Blue, Amber, RGB
Input Voltage: 120v or 277V
Dimming Type: 0-120VL(LV), 0-10V or none
Fixture finish: standard mill, black or custom
Application: interior IP00 or exterior IP67
Custom Options
Powder coated colors