The Neotek PS-360-LO is a straight self-contained light emitting diode fixture, available in lengths 18” to 8’. The extrusion consists of two parts (Back and Front) and is made of aluminum. The extrusion features a standard mill finish or can also be custom anodized.
Features
Extrusion: .125 diameter holes for fastening the end plate or steel pins for attaching of adjacent fixtures. Set screws for attachment to front extrusion. Will house a 24v led power supply and if applicable, the DMX decoder for RGB/RGBW applications. Can be used as a wire way.
LED’s: High output 3528 binned chips, 24v DC operating voltage. Consuming 3.00 watts per foot – available in the colors listed below. The chips and circuitry are fastened to the aluminum fixture. The strips produce 420 lumens per foot measured at 1.5ft from the fixture.
Power Supply: The power supply is a solid-state power supply mounted inside the back extrusion or remotely for serviceability. The power supply will be rated for the fixture size and wattage consumption required.
End Caps: They shall be an aluminum end cap on exposed ends with or without wire holes as needed.
Lens: The fixture will have a lens made of UV protected acrylic and will snap into the interior sides of the front extrusion.
These lenses are recognized by UL and have a flame class of 94HB.
All LED linear fixtures are dimmable using various types of dimmers. RGB/RGBW/RGBA can be controlled with any DMX 512 protocol, however assistance is available from Neotek for more specific control solutions.
Standard Options
Colors of LED Light: 24K White, 28K White, 30K White, 35K White, 40K White, 65K White, Red, Green, Blue, Amber, RGB, RGBW, other
Lens: Frosted
Input Voltage: 120v or 277v
Power Supply/DMX Decoder Locations: Internal or External
Dimming Type: 0-120VL (LV) or 0-10V
Fixture finish: Standard mill
Application: Interior IP00 or exterior IP67
Custom Options
Contact Neotek Customer Service for available custom applications, configurations or finish options